CORE OF BUSINESS
Sewerage Treatment Plant
Sewerage Treatment Plant are classified accordance to design capacity in terms of Population Equivalent (PE). There are four classification to be adopted as shown on Figure below.

 
Classification PE
Class 1 ≤ 1000
Class 2 1001 - 5000
Class 3 5001 - 20000
Class 4 > 20000
There are several sewerage treatment plant system.
1) Fine Bubble Diffuser Air Extended Aeration System (EA)
One of them is through Fine Bubble Diffuser Air Extended Aeration System (EA); sequence process as shown in Figure below which operated in combination of both aerobic and anerobic condition.

 

Fine Bubble Diffuser Air Extended Aeration system (EA)
Advantages using this EA process is to have longer hydraulic retention time which allow process to operate effectively over widely varying flow and waste loading. This process allows sewage to undergo screening process in removing debris, grit and grease. Once completed screening process, the sewage will flow into anoxic tank with sufficient mixing to breakdown biodegradable organic matter without oxygen supply. Biodegradable organic matter and non-biodegradable organic matter (inorganic matter) are decomposed by bacterial in the aeration tank with oxygen supply generated by mechanical equipment. Lastly, the treated effluent are then discharge to downstream river in accordance to Environmental Quality Act 1974 standard B.
 
2) Sequencing Batch Reactor (SBR) System
Second method is SBR system which are operated in batch of mechanical biological treatment at same reactor with different sequences of time as shown in Figure below:

 
The process of SBR system is considered a fill and draw activated sludge system and whole treatment was controlled by Programmable Logic Controller (PLC). Through system operation, the bacteria in sewage was decomposed into biodegradable and non-biodegradable organic matter in aerobic condition with sufficient oxygen supply generated by mechanical equipment. The balancing tank at preliminary treatment is used for storage purpose when the secondary treatment begin. During the secondary treatment, sewage transfer from balancing tank to SBR tank will be fill and aerated together. After completed aerated process, the sewage will settle in sufficient time and decant was start by mechanical equipment which c
 
3) Oxidation Ditch (OD) System
Third method of SBR system whereby oxidation ditch activated sludge system is similar EA system in different sequences as shown in Figure below:

 
The difference between OD and EA system are the aerobic, anaerobic and sedimentation process operated in sequences of process in oxidation pond. Furthermore, the process designed with minimum velocity (0.3 m/s) within the oxidation pond and sufficient unidirectional air to keep activated sludge in suspension for decomposed process to occur. Mechanical aeration equipment such as surface aerator and paddle wheel help to generate oxygen supply in the pond.
 
4) Membrane Bio Reactor (MBR) System
Membrane Bio Reactor (MBR) is an advanced technology and reliable wastewater treatment processes.

It is a combination of conventional biological treatment (activated sludge) processes with membrane filtration like microfiltration/ultrafiltration with a suspended growth bioreactor to provide an advanced level of organic and suspended solids removal. Also, coliform bacteria and virus can be shut out as well. This level of filtration allows high quality effluent to be drawn through the membranes and eliminates the sedimentation and filtration processes.

Complete independent control of Hydraulic Retention Time (HRT) and Sludge Retention Time (SRT). Allows more complete reduction of COD, and improved stability of processes such as nitrification. The mixed liquor from the biological treatment can be separated clearly into solid and liquid state. It assures almost 100% removal of SS and no carry over of SS into the effluent.

MBR system is widely used for municipal and industrial wastewater treatment plant with plant sizes up to 80,000 population equivalents. Thus, is commonly used when daily volume are 48 million liters per day or less.

 
5) FRP System Treatment Process (C.A.T)
Compact Anaerobic Technology (CAT) System is adapted to characteristics of the wastewater to treat and designed to achieve the highest efficiency. The effluent from CAT System is virtually odourless and harmless and suitable for discharge into public drain to keep our environment green.

System Features & Advantages

  • Environmental Friendly
  • Easy to Install, Operate and Maintain
  • Durable
  • Corrosion Resistant
  • Odourless
  • Compact
  •  
5.1) Individual Septic Tank (PE Range: 5 – 30)
Cater for Population Equivalent from 5 PE to 30 PE.

Model: Compact Anaerobic Technology (CAT) System

Meets Standard:

i)Environment Quality Control Standard ‘’B’’
ii)Suruhanjaya Perkhidmatan Air Negara (SPAN)
iii)Indah Water Konsortium Sdn Bhd (IWK)

 
5.2) Small Sewage Treatment Plant (PE Range: 31 – 149)
Cater for Population Equivalent from 31 PE to 149 PE

Model: Compact Anaerobic Technology (CAT) System

Meets Standard:

i)Environment Quality Control Standard ‘’B’’
ii)Suruhanjaya Perkhidmatan Air Negara (SPAN)
iii)Indah Water Konsortium Sdn Bhd (IWK)

 
5.3) Fibre Reinforced Plastic (FRP) Package Sewage Treatment Plant (PE Range: 151 – 1000)
Cater for Population Equivalent from 151 PE to 1,000 PE

Model: Compact Anaerobic Technology (CAT) System

Meets Standard:

i)Environment Quality Control Standard ‘’B’’
ii)Suruhanjaya Perkhidmatan Air Negara (SPAN)
iii)Indah Water Konsortium Sdn Bhd (IWK)

 
CORE OF BUSINESS
Build, Construction & Refurbishment, Testing & Commissioning of Sewerage Treatment Plant (STP)
We provide end-to-end services in building, construction& Refurbishment, Testing & Commissioning of sewage treatment plant and pumping station from scratch especially extended aeration system process.

 
Waste water Treatment Plant (WWTP)
Waste water are treated through removal of impurities from water applicable for both waste and waste water. The physical infrastructure used for waste water treatment is called “waste water treatment plant or WWTP”.

 
Water Treatment Plant (WTP)
We provide excellent services supplying, repairing and installation of all equipment used for water treatment plant.

 
Mechanical Equipment Maintenance & Repair
We provide services supplying, repairing and installation of all mechanical equipment used for maintenance & repairing STP.

 
Electrical Equipment Maintenance & Repair
We provide services supplying, repairing and installation of all electrical equipment used for maintenance & repairing STP


 
Telecommunication Tower & Fiber Optic Cable Installation
SERVICES PROVIDED
  • TELECOMUNICATIONS
    • Antennas, RRU, BBU, Site Survey, CME
    • Integration & Acceptance Test
    • Tower, Pole, Rooftop, IBC installation
    • WIFI, Hotspots & Access Control, FTTH & FTTO, VDSL & ADSL
    • Tower Erection / Decommissioning
    • Tower Modifications
    • Microwave – Engineering, Path Alignment & Testing

  • FIBRE OPTIC CABLE INSTALLATIONS
    • All-Dielectric Self Supporting (ADSS)
    • Optical Fibre Grounding Wire (OPGW)
    • Steel Beam Clamp with Hot-Dip Galvanized Fin
    • Fibre Optic cable laying, pulling, splicing, termination, testing & commissioning (HDD)the
  •  
We differentiate ourselves in the telecommunication industry by providing outstanding service & innovation trough leadership. To monitor our progress & encourage candid collaboration with our clients, we established the “Service Excellence” program or in short, WE GET THE JOB DONE! This is instrumental to our success in cultivating and maintaining long-term business relationship with our clients & vendor.

1. Health & Safety


  • This will be our priority in order to maintain a healthy and safe working environment for all our staff, clients & vendor
  • Our staff & supplier base operate according to local & international accepted industry practices in every field we operate in, ensuring the project delivery is safe and fit for purpose

2.Experience & reputation


  • Broad ranging experience with many leading manufactures of GSM, UMTS, LTE, Power & Microwave Equipment
  • All of our staff has significant multiple vendor experience and are trained to cope with clients demand in the ever-changing technology
Switch To Desktop Version